Gunsmithing
NFA Center
Finishing & Metalwork
Restoration
Logistics & Commerce
About the ShopFFL / SOT LicensingContact
(877) 536-2637

Gunsmith Pricing

Every bench service, priced up front.

The whole menu in one place — search it, filter it, open any line for the full option breakdown. These are starting rates for common configurations; the final number is confirmed before we touch your firearm.

Services
27
Range
$15 – $575
Categories
6
Quote
Before work

27 services

Barrel Work

04
Muzzle Device Install / SwapMuzzle device removal & installation1–2 days$25

Professional removal of your existing muzzle device and installation of a new one. We torque to spec, time the device with shims or a crush washer, and apply Rocksett for a secure hold. Whether you're mounting a brake, comp, or flash hider, it leaves our bench properly timed and locked down. Feel free to contact us if you need a custom quote.

Existing Device Removal · choose one

  • Standard removal (crush washer / shims)incl.
  • Rockset / threadlocker removalincl.
LP-SVC-MUZZLE-SWAPBook this service →
Pin & Weld Muzzle DevicePin & weld muzzle device for 16" OAL compliance3–5 daysfrom $75

Permanent pin and weld of a muzzle device to bring your barrel to the legal 16" overall length. The weld is carefully dressed and blended for a clean, professional finish. We offer cold blue, Cerakote color-match, or raw blend if you're sending it out for a full Cerakote job. Feel free to contact us if you need a custom quote.

Un-Pin Existing Device · add any

  • Remove existing pin & weld first+$50

Finish After Weld · choose one

  • Blend & cold blue (standard)incl.
  • Blend & Cerakote spot (color match)+$35
  • Blend only (leaving raw for full Cerakote job)incl.
LP-SVC-MUZZLE-PINWELDBook this service →
Barrel ThreadingPrecision barrel threading for muzzle devices & suppressors5–7 daysfrom $160

Precision barrel threading for muzzle devices and suppressors, performed on a lathe with proper thread concentricity verified using an alignment rod. We handle all common thread pitches — 1/2x28, 5/8x24, 1/2x36, .578x28, M13.5x1 LH, and custom. Your choice of crown type and optional thread protector included. Feel free to contact us if you need a custom quote.

Caliber · choose one

  • .223 / 5.56 NATOincl.
  • .308 / 7.62 NATOincl.
  • 9mmincl.
  • .45 ACPincl.
  • Other (specify in notes)+$10

Crown Type · choose one

  • Target crown (recessed)incl.
  • 11-degree suppressor-ready crownincl.
  • Flat / square crownincl.

Thread Protector · add any

  • Include knurled thread protector+$10
LP-SVC-BBL-THREADBook this service →
Barrel Chop & CrownBarrel cut-down to specified length with precision re-crown5–7 daysfrom $100

Professional barrel cut-down to your specified length with a precision re-crown. Ideal for SBR builds or trimming a barrel to your preferred length. Choose from target, 11-degree suppressor-ready, or flat crown profiles. Threading available as an add-on so your barrel is ready for a muzzle device right away. Feel free to contact us if you need a custom quote.

Crown Type · choose one

  • Target crown (recessed)incl.
  • 11-degree suppressor-ready crownincl.
  • Flat / square crownincl.

Add Threading · add any

  • Thread the barrel after chop (+$75)+$140

Thread Pitch

  • 1/2x28incl.
  • 5/8x24incl.
  • 1/2x36incl.
  • .578x28incl.
  • M13.5x1 LHincl.
  • Other (specify in notes)incl.
LP-SVC-BBL-CHOPBook this service →

Cerakote

10
Cerakote — Standard HandgunCerakote for Glock, M&P, Sig, CZ, and similar handguns7–14 days$20–$375

Professional Cerakote H-series ceramic coating for polymer and striker-fired handguns — Glock, M&P, Sig P320/P365, CZ, and similar platforms. Every job includes complete disassembly, thorough media-blast prep, expert coating application, reassembly, and function check. Available in 60+ colors, two-tone, and multi-color camo patterns. Metal-frame semi-autos require additional fitting. Feel free to contact us if you need a custom quote.

Service · choose one

  • Complete Handgun — Single Color$200
  • Complete Handgun — Two-Tone (2 colors)$250
  • Complete Handgun — 3-Color Camo$325
  • Slide Only — Single Color$90
  • Frame Only — Single Color$100
  • Slide + Frame — Same Color$180
  • Slide + Frame — Two-Tone$225
  • Barrel Only$60
  • Magazine (each, 3 min.) — Matching Color$20
  • Magazine (each) — Unique Color$30
  • Small Parts Lot (pins, controls, mag release)$45

Assembly Status · choose one

  • Polymer striker-fired (Glock, M&P, P320) — dis/re includedincl.
  • Metal-frame semi-auto (Sig P226, CZ 75, Beretta) — +$50+$50

Color · choose one

  • Armor Black (H-190)incl.
  • Graphite Black (H-146)incl.
  • Tungsten (H-237)incl.
  • Titanium (H-170)incl.
  • Sniper Grey (H-234)incl.
  • Gun Metal Grey (H-219)incl.
  • Concrete (H-341)incl.
  • Flat Dark Earth (H-265)incl.
  • Burnt Bronze (H-148)incl.
  • Midnight Bronze (H-294)incl.
  • Chocolate Brown (H-258)incl.
  • Patriot Brown (H-226)incl.
  • Coyote Tan (H-235)incl.
  • Desert Sand (H-199)incl.
  • OD Green (H-236)incl.
  • Noveske Bazooka Green (H-189)incl.
  • Forest Green (H-248)incl.
  • Highland Green (H-200)incl.
  • Ridgeway Blue (H-220)incl.
  • KEL-TEC Navy Blue (H-127)incl.
  • USMC Red (H-167)incl.
  • Crimson (H-221)incl.
  • Stormtrooper White (H-297)incl.
  • Satin Aluminum (H-151)incl.
  • Cobalt Kinetics Slate (H-295)incl.
  • Other (specify below)incl.

Second Color

  • Armor Black (H-190)incl.
  • Graphite Black (H-146)incl.
  • Tungsten (H-237)incl.
  • Titanium (H-170)incl.
  • Sniper Grey (H-234)incl.
  • Gun Metal Grey (H-219)incl.
  • Concrete (H-341)incl.
  • Flat Dark Earth (H-265)incl.
  • Burnt Bronze (H-148)incl.
  • Midnight Bronze (H-294)incl.
  • Chocolate Brown (H-258)incl.
  • Patriot Brown (H-226)incl.
  • Coyote Tan (H-235)incl.
  • Desert Sand (H-199)incl.
  • OD Green (H-236)incl.
  • Noveske Bazooka Green (H-189)incl.
  • Forest Green (H-248)incl.
  • Highland Green (H-200)incl.
  • Ridgeway Blue (H-220)incl.
  • KEL-TEC Navy Blue (H-127)incl.
  • USMC Red (H-167)incl.
  • Crimson (H-221)incl.
  • Stormtrooper White (H-297)incl.
  • Satin Aluminum (H-151)incl.
  • Cobalt Kinetics Slate (H-295)incl.
  • Other (specify below)incl.

Camo Pattern

  • MultiCamincl.
  • MultiCam Blackincl.
  • MultiCam Aridincl.
  • Woodland (M81)incl.
  • Digital / MARPATincl.
  • Tiger Stripeincl.
  • Kryptek Typhonincl.
  • Splinter / Geometricincl.
  • Snow / Arcticincl.
  • Custom Pattern (specify below)incl.
LP-SVC-CERA-HG-STDBook this service →
Cerakote — Precision HandgunCerakote for 1911/2011, HK, Springfield XD, and complex handguns10–21 days$110–$540

Professional Cerakote H-series ceramic coating for precision handgun platforms — 1911/2011, HK, and Springfield XD/XDM. Cerakote adds approximately 1 mil per surface, so every complete job includes expert disassembly, media blasting, coating, reassembly with hand-fitted slide-to-frame tolerances, and function check. Competition and custom 1911s may require additional fitting work. Feel free to contact us if you need a custom quote.

Service · choose one

  • 1911/2011 — Complete — Single Color$300
  • 1911/2011 — Complete — Two-Tone$375
  • 1911/2011 — Complete — 3-Color Camo$475
  • 1911/2011 — Slide Only$110
  • 1911/2011 — Frame Only$130
  • HK — Complete — Single Color$300
  • HK — Complete — Two-Tone$375
  • Springfield XD/XDM — Complete — Single Color$275
  • Springfield XD/XDM — Complete — Two-Tone$350

Competition Surcharge · add any

  • Competition/custom 1911 (STI, Staccato, Wilson) — additional fitting +$65+$65

Color · choose one

  • Armor Black (H-190)incl.
  • Graphite Black (H-146)incl.
  • Tungsten (H-237)incl.
  • Titanium (H-170)incl.
  • Sniper Grey (H-234)incl.
  • Gun Metal Grey (H-219)incl.
  • Concrete (H-341)incl.
  • Flat Dark Earth (H-265)incl.
  • Burnt Bronze (H-148)incl.
  • Midnight Bronze (H-294)incl.
  • Chocolate Brown (H-258)incl.
  • Patriot Brown (H-226)incl.
  • Coyote Tan (H-235)incl.
  • Desert Sand (H-199)incl.
  • OD Green (H-236)incl.
  • Noveske Bazooka Green (H-189)incl.
  • Forest Green (H-248)incl.
  • Highland Green (H-200)incl.
  • Ridgeway Blue (H-220)incl.
  • KEL-TEC Navy Blue (H-127)incl.
  • USMC Red (H-167)incl.
  • Crimson (H-221)incl.
  • Stormtrooper White (H-297)incl.
  • Satin Aluminum (H-151)incl.
  • Cobalt Kinetics Slate (H-295)incl.
  • Other (specify below)incl.

Second Color

  • Armor Black (H-190)incl.
  • Graphite Black (H-146)incl.
  • Tungsten (H-237)incl.
  • Titanium (H-170)incl.
  • Sniper Grey (H-234)incl.
  • Gun Metal Grey (H-219)incl.
  • Concrete (H-341)incl.
  • Flat Dark Earth (H-265)incl.
  • Burnt Bronze (H-148)incl.
  • Midnight Bronze (H-294)incl.
  • Chocolate Brown (H-258)incl.
  • Patriot Brown (H-226)incl.
  • Coyote Tan (H-235)incl.
  • Desert Sand (H-199)incl.
  • OD Green (H-236)incl.
  • Noveske Bazooka Green (H-189)incl.
  • Forest Green (H-248)incl.
  • Highland Green (H-200)incl.
  • Ridgeway Blue (H-220)incl.
  • KEL-TEC Navy Blue (H-127)incl.
  • USMC Red (H-167)incl.
  • Crimson (H-221)incl.
  • Stormtrooper White (H-297)incl.
  • Satin Aluminum (H-151)incl.
  • Cobalt Kinetics Slate (H-295)incl.
  • Other (specify below)incl.

Camo Pattern

  • MultiCamincl.
  • MultiCam Blackincl.
  • MultiCam Aridincl.
  • Woodland (M81)incl.
  • Digital / MARPATincl.
  • Tiger Stripeincl.
  • Kryptek Typhonincl.
  • Splinter / Geometricincl.
  • Snow / Arcticincl.
  • Custom Pattern (specify below)incl.
LP-SVC-CERA-HG-PRECBook this service →
Cerakote — RevolverCerakote for revolvers — all frame sizes10–14 daysfrom $225

Professional Cerakote H-series ceramic coating for revolvers of all frame sizes. Every job covers the cylinder, frame, barrel, and crane, with complete disassembly, media-blast prep, expert coating, reassembly, and cylinder timing verification. Available in 60+ colors with multi-color options for a truly custom look. Feel free to contact us if you need a custom quote.

Frame Size · choose one

  • Small Frame (J-frame, LCR, etc.)incl.
  • Medium Frame (K/L-frame, GP100)+$50
  • Large Frame (N-frame, Super Redhawk)+$100

Additional Colors · choose one

  • Single color onlyincl.
  • +1 additional color (+$55)+$55
  • +2 additional colors (+$110)+$110

Color · choose one

  • Armor Black (H-190)incl.
  • Graphite Black (H-146)incl.
  • Tungsten (H-237)incl.
  • Titanium (H-170)incl.
  • Sniper Grey (H-234)incl.
  • Gun Metal Grey (H-219)incl.
  • Concrete (H-341)incl.
  • Flat Dark Earth (H-265)incl.
  • Burnt Bronze (H-148)incl.
  • Midnight Bronze (H-294)incl.
  • Chocolate Brown (H-258)incl.
  • Patriot Brown (H-226)incl.
  • Coyote Tan (H-235)incl.
  • Desert Sand (H-199)incl.
  • OD Green (H-236)incl.
  • Noveske Bazooka Green (H-189)incl.
  • Forest Green (H-248)incl.
  • Highland Green (H-200)incl.
  • Ridgeway Blue (H-220)incl.
  • KEL-TEC Navy Blue (H-127)incl.
  • USMC Red (H-167)incl.
  • Crimson (H-221)incl.
  • Stormtrooper White (H-297)incl.
  • Satin Aluminum (H-151)incl.
  • Cobalt Kinetics Slate (H-295)incl.
  • Other (specify below)incl.
LP-SVC-CERA-REVBook this service →
Cerakote — AR-15 / M4Cerakote for AR-15 / M4 platform7–21 days$25–$450

Professional Cerakote H-series ceramic coating for AR-15 and M4 platform rifles and pistols. Complete firearm service covers upper, lower, handguard, barrel, stock, grip, controls, and up to two magazines. Every job includes full disassembly, media blasting, coating, reassembly, and function check. BCG coated with Micro Slick C-109 anti-friction ceramic. Available in 60+ colors, two-tone, and camo patterns. Feel free to contact us if you need a custom quote.

Service · choose one

  • Complete AR-15 — Single Color$300
  • Complete AR-15 — Two-Tone (2 colors)$375
  • Complete AR-15 — 3-Color Camo$450
  • Upper Receiver Only$80
  • Lower Receiver Only$80
  • Upper + Lower — Same Color$150
  • Upper + Lower + Handguard — Same Color$215
  • Handguard Only (M-LOK / Quad Rail)$80
  • Barrel Only (gas journal masked)$90
  • BCG — Micro Slick / C-109 (anti-friction)$75
  • Stock — Collapsible (Magpul, B5, MFT)$65
  • Stock — Fixed (A2, Rifle-length)$75
  • Lower Parts Kit (trigger, pins, catches)$65
  • Magazine (each, 3 min.)$25

Color · choose one

  • Armor Black (H-190)incl.
  • Graphite Black (H-146)incl.
  • Tungsten (H-237)incl.
  • Titanium (H-170)incl.
  • Sniper Grey (H-234)incl.
  • Gun Metal Grey (H-219)incl.
  • Concrete (H-341)incl.
  • Flat Dark Earth (H-265)incl.
  • Burnt Bronze (H-148)incl.
  • Midnight Bronze (H-294)incl.
  • Chocolate Brown (H-258)incl.
  • Patriot Brown (H-226)incl.
  • Coyote Tan (H-235)incl.
  • Desert Sand (H-199)incl.
  • OD Green (H-236)incl.
  • Noveske Bazooka Green (H-189)incl.
  • Forest Green (H-248)incl.
  • Highland Green (H-200)incl.
  • Ridgeway Blue (H-220)incl.
  • KEL-TEC Navy Blue (H-127)incl.
  • USMC Red (H-167)incl.
  • Crimson (H-221)incl.
  • Stormtrooper White (H-297)incl.
  • Satin Aluminum (H-151)incl.
  • Cobalt Kinetics Slate (H-295)incl.
  • Other (specify below)incl.

Second Color

  • Armor Black (H-190)incl.
  • Graphite Black (H-146)incl.
  • Tungsten (H-237)incl.
  • Titanium (H-170)incl.
  • Sniper Grey (H-234)incl.
  • Gun Metal Grey (H-219)incl.
  • Concrete (H-341)incl.
  • Flat Dark Earth (H-265)incl.
  • Burnt Bronze (H-148)incl.
  • Midnight Bronze (H-294)incl.
  • Chocolate Brown (H-258)incl.
  • Patriot Brown (H-226)incl.
  • Coyote Tan (H-235)incl.
  • Desert Sand (H-199)incl.
  • OD Green (H-236)incl.
  • Noveske Bazooka Green (H-189)incl.
  • Forest Green (H-248)incl.
  • Highland Green (H-200)incl.
  • Ridgeway Blue (H-220)incl.
  • KEL-TEC Navy Blue (H-127)incl.
  • USMC Red (H-167)incl.
  • Crimson (H-221)incl.
  • Stormtrooper White (H-297)incl.
  • Satin Aluminum (H-151)incl.
  • Cobalt Kinetics Slate (H-295)incl.
  • Other (specify below)incl.

Camo Pattern

  • MultiCamincl.
  • MultiCam Blackincl.
  • MultiCam Aridincl.
  • Woodland (M81)incl.
  • Digital / MARPATincl.
  • Tiger Stripeincl.
  • Kryptek Typhonincl.
  • Splinter / Geometricincl.
  • Snow / Arcticincl.
  • Custom Pattern (specify below)incl.
LP-SVC-CERA-AR15Book this service →
Cerakote — AR-10 / AK / Large FrameCerakote for AR-10, AK, FAL, G3, and large-frame rifles7–21 days$50–$500

Professional Cerakote H-series ceramic coating for large-frame rifles — AR-10/SR-25, AK-pattern, FN FAL, HK G3, and similar platforms. Every job includes complete disassembly, thorough media-blast prep, expert coating application, reassembly, and function check. Available in 60+ colors, two-tone, and multi-color camo patterns. Feel free to contact us if you need a custom quote.

Service · choose one

  • AK — Complete — Single Color$300
  • AK — Complete — Two-Tone$375
  • AK Dust Cover / Gas Tube / Handguard (each)$50
  • AR-10 / SR-25 — Complete — Single Color$350
  • AR-10 / SR-25 — Complete — Two-Tone$425
  • AR-10 / SR-25 — Complete — 3-Color Camo$500
  • FN FAL / HK G3 / Roller-Lock — Single Color$375

Color · choose one

  • Armor Black (H-190)incl.
  • Graphite Black (H-146)incl.
  • Tungsten (H-237)incl.
  • Titanium (H-170)incl.
  • Sniper Grey (H-234)incl.
  • Gun Metal Grey (H-219)incl.
  • Concrete (H-341)incl.
  • Flat Dark Earth (H-265)incl.
  • Burnt Bronze (H-148)incl.
  • Midnight Bronze (H-294)incl.
  • Chocolate Brown (H-258)incl.
  • Patriot Brown (H-226)incl.
  • Coyote Tan (H-235)incl.
  • Desert Sand (H-199)incl.
  • OD Green (H-236)incl.
  • Noveske Bazooka Green (H-189)incl.
  • Forest Green (H-248)incl.
  • Highland Green (H-200)incl.
  • Ridgeway Blue (H-220)incl.
  • KEL-TEC Navy Blue (H-127)incl.
  • USMC Red (H-167)incl.
  • Crimson (H-221)incl.
  • Stormtrooper White (H-297)incl.
  • Satin Aluminum (H-151)incl.
  • Cobalt Kinetics Slate (H-295)incl.
  • Other (specify below)incl.

Second Color

  • Armor Black (H-190)incl.
  • Graphite Black (H-146)incl.
  • Tungsten (H-237)incl.
  • Titanium (H-170)incl.
  • Sniper Grey (H-234)incl.
  • Gun Metal Grey (H-219)incl.
  • Concrete (H-341)incl.
  • Flat Dark Earth (H-265)incl.
  • Burnt Bronze (H-148)incl.
  • Midnight Bronze (H-294)incl.
  • Chocolate Brown (H-258)incl.
  • Patriot Brown (H-226)incl.
  • Coyote Tan (H-235)incl.
  • Desert Sand (H-199)incl.
  • OD Green (H-236)incl.
  • Noveske Bazooka Green (H-189)incl.
  • Forest Green (H-248)incl.
  • Highland Green (H-200)incl.
  • Ridgeway Blue (H-220)incl.
  • KEL-TEC Navy Blue (H-127)incl.
  • USMC Red (H-167)incl.
  • Crimson (H-221)incl.
  • Stormtrooper White (H-297)incl.
  • Satin Aluminum (H-151)incl.
  • Cobalt Kinetics Slate (H-295)incl.
  • Other (specify below)incl.

Camo Pattern

  • MultiCamincl.
  • MultiCam Blackincl.
  • MultiCam Aridincl.
  • Woodland (M81)incl.
  • Digital / MARPATincl.
  • Tiger Stripeincl.
  • Kryptek Typhonincl.
  • Splinter / Geometricincl.
  • Snow / Arcticincl.
  • Custom Pattern (specify below)incl.
LP-SVC-CERA-LFBook this service →
Cerakote — Bolt-Action & RimfireCerakote for bolt-action and rimfire rifles7–21 days$45–$375

Professional Cerakote H-series ceramic coating for bolt-action and rimfire rifles. Complete service covers the barreled action and stock, with bolt coated in Micro Slick C-109 anti-friction ceramic. Every job includes full disassembly, media blasting, coating, reassembly, and function check. Chassis and rimfire platforms welcome. Available in 60+ colors and camo patterns. Feel free to contact us if you need a custom quote.

Service · choose one

  • Complete Bolt-Action (Rem 700 class) — Single Color$250
  • Complete Bolt-Action — Two-Tone$300
  • Complete Bolt-Action — 3-Color Camo$375
  • Barreled Action Only — Single Color$175
  • Barrel Only$90
  • Bolt Only (Micro Slick / C-109)$65
  • Stock — Standard Synthetic/Wood$125
  • Stock — Tactical / Adjustable (Magpul, B5)$150
  • Chassis (MDT, KRG, XLR, etc.)$225
  • Bottom Metal / Trigger Guard$45
  • Rimfire — Complete — Single Color (10/22, CZ 457)$175

Color · choose one

  • Armor Black (H-190)incl.
  • Graphite Black (H-146)incl.
  • Tungsten (H-237)incl.
  • Titanium (H-170)incl.
  • Sniper Grey (H-234)incl.
  • Gun Metal Grey (H-219)incl.
  • Concrete (H-341)incl.
  • Flat Dark Earth (H-265)incl.
  • Burnt Bronze (H-148)incl.
  • Midnight Bronze (H-294)incl.
  • Chocolate Brown (H-258)incl.
  • Patriot Brown (H-226)incl.
  • Coyote Tan (H-235)incl.
  • Desert Sand (H-199)incl.
  • OD Green (H-236)incl.
  • Noveske Bazooka Green (H-189)incl.
  • Forest Green (H-248)incl.
  • Highland Green (H-200)incl.
  • Ridgeway Blue (H-220)incl.
  • KEL-TEC Navy Blue (H-127)incl.
  • USMC Red (H-167)incl.
  • Crimson (H-221)incl.
  • Stormtrooper White (H-297)incl.
  • Satin Aluminum (H-151)incl.
  • Cobalt Kinetics Slate (H-295)incl.
  • Other (specify below)incl.

Second Color

  • Armor Black (H-190)incl.
  • Graphite Black (H-146)incl.
  • Tungsten (H-237)incl.
  • Titanium (H-170)incl.
  • Sniper Grey (H-234)incl.
  • Gun Metal Grey (H-219)incl.
  • Concrete (H-341)incl.
  • Flat Dark Earth (H-265)incl.
  • Burnt Bronze (H-148)incl.
  • Midnight Bronze (H-294)incl.
  • Chocolate Brown (H-258)incl.
  • Patriot Brown (H-226)incl.
  • Coyote Tan (H-235)incl.
  • Desert Sand (H-199)incl.
  • OD Green (H-236)incl.
  • Noveske Bazooka Green (H-189)incl.
  • Forest Green (H-248)incl.
  • Highland Green (H-200)incl.
  • Ridgeway Blue (H-220)incl.
  • KEL-TEC Navy Blue (H-127)incl.
  • USMC Red (H-167)incl.
  • Crimson (H-221)incl.
  • Stormtrooper White (H-297)incl.
  • Satin Aluminum (H-151)incl.
  • Cobalt Kinetics Slate (H-295)incl.
  • Other (specify below)incl.

Camo Pattern

  • MultiCamincl.
  • MultiCam Blackincl.
  • MultiCam Aridincl.
  • Woodland (M81)incl.
  • Digital / MARPATincl.
  • Tiger Stripeincl.
  • Kryptek Typhonincl.
  • Splinter / Geometricincl.
  • Snow / Arcticincl.
  • Custom Pattern (specify below)incl.
LP-SVC-CERA-BOLTBook this service →
Cerakote — ShotgunCerakote for pump and semi-auto shotguns7–21 days$40–$375

Professional Cerakote H-series ceramic coating for pump-action and semi-automatic shotguns. Complete service covers receiver, barrel, stock, forend, and controls. Every job includes full disassembly, thorough media-blast prep, expert coating, reassembly, and function check. Available in 60+ colors, two-tone, and multi-color camo patterns. Feel free to contact us if you need a custom quote.

Service · choose one

  • Complete Shotgun — Single Color$250
  • Complete Shotgun — Two-Tone$300
  • Complete Shotgun — 3-Color Camo$375
  • Receiver Only$85
  • Barrel Only$90
  • Stock + Forend$90
  • Magazine Tube Extension$40

Color · choose one

  • Armor Black (H-190)incl.
  • Graphite Black (H-146)incl.
  • Tungsten (H-237)incl.
  • Titanium (H-170)incl.
  • Sniper Grey (H-234)incl.
  • Gun Metal Grey (H-219)incl.
  • Concrete (H-341)incl.
  • Flat Dark Earth (H-265)incl.
  • Burnt Bronze (H-148)incl.
  • Midnight Bronze (H-294)incl.
  • Chocolate Brown (H-258)incl.
  • Patriot Brown (H-226)incl.
  • Coyote Tan (H-235)incl.
  • Desert Sand (H-199)incl.
  • OD Green (H-236)incl.
  • Noveske Bazooka Green (H-189)incl.
  • Forest Green (H-248)incl.
  • Highland Green (H-200)incl.
  • Ridgeway Blue (H-220)incl.
  • KEL-TEC Navy Blue (H-127)incl.
  • USMC Red (H-167)incl.
  • Crimson (H-221)incl.
  • Stormtrooper White (H-297)incl.
  • Satin Aluminum (H-151)incl.
  • Cobalt Kinetics Slate (H-295)incl.
  • Other (specify below)incl.

Second Color

  • Armor Black (H-190)incl.
  • Graphite Black (H-146)incl.
  • Tungsten (H-237)incl.
  • Titanium (H-170)incl.
  • Sniper Grey (H-234)incl.
  • Gun Metal Grey (H-219)incl.
  • Concrete (H-341)incl.
  • Flat Dark Earth (H-265)incl.
  • Burnt Bronze (H-148)incl.
  • Midnight Bronze (H-294)incl.
  • Chocolate Brown (H-258)incl.
  • Patriot Brown (H-226)incl.
  • Coyote Tan (H-235)incl.
  • Desert Sand (H-199)incl.
  • OD Green (H-236)incl.
  • Noveske Bazooka Green (H-189)incl.
  • Forest Green (H-248)incl.
  • Highland Green (H-200)incl.
  • Ridgeway Blue (H-220)incl.
  • KEL-TEC Navy Blue (H-127)incl.
  • USMC Red (H-167)incl.
  • Crimson (H-221)incl.
  • Stormtrooper White (H-297)incl.
  • Satin Aluminum (H-151)incl.
  • Cobalt Kinetics Slate (H-295)incl.
  • Other (specify below)incl.

Camo Pattern

  • MultiCamincl.
  • MultiCam Blackincl.
  • MultiCam Aridincl.
  • Woodland (M81)incl.
  • Digital / MARPATincl.
  • Tiger Stripeincl.
  • Kryptek Typhonincl.
  • Splinter / Geometricincl.
  • Snow / Arcticincl.
  • Custom Pattern (specify below)incl.
LP-SVC-CERA-SGBook this service →
Cerakote — SuppressorHigh-temp Cerakote C-Series for suppressors7–14 daysfrom $100

Cerakote C-Series high-temperature ceramic coating for suppressors, rated to 1700°F — the standard for suppressor applications. Every job includes thorough surface prep and expert coating for a durable, uniform finish. Available in single color, two-tone, and multi-color camo patterns. SBR/SBS/AOW items priced at their base platform rate. Feel free to contact us if you need a custom quote.

Service · choose one

  • Suppressor — Single Color (C-Series High Temp)incl.
  • Suppressor — Two-Tone+$50
  • Suppressor — 3-Color Camo+$100

Color · choose one

  • Armor Black (H-190)incl.
  • Graphite Black (H-146)incl.
  • Tungsten (H-237)incl.
  • Titanium (H-170)incl.
  • Sniper Grey (H-234)incl.
  • Gun Metal Grey (H-219)incl.
  • Concrete (H-341)incl.
  • Flat Dark Earth (H-265)incl.
  • Burnt Bronze (H-148)incl.
  • Midnight Bronze (H-294)incl.
  • Chocolate Brown (H-258)incl.
  • Patriot Brown (H-226)incl.
  • Coyote Tan (H-235)incl.
  • Desert Sand (H-199)incl.
  • OD Green (H-236)incl.
  • Noveske Bazooka Green (H-189)incl.
  • Forest Green (H-248)incl.
  • Highland Green (H-200)incl.
  • Ridgeway Blue (H-220)incl.
  • KEL-TEC Navy Blue (H-127)incl.
  • USMC Red (H-167)incl.
  • Crimson (H-221)incl.
  • Stormtrooper White (H-297)incl.
  • Satin Aluminum (H-151)incl.
  • Cobalt Kinetics Slate (H-295)incl.
  • Other (specify below)incl.

Second Color

  • Armor Black (H-190)incl.
  • Graphite Black (H-146)incl.
  • Tungsten (H-237)incl.
  • Titanium (H-170)incl.
  • Sniper Grey (H-234)incl.
  • Gun Metal Grey (H-219)incl.
  • Concrete (H-341)incl.
  • Flat Dark Earth (H-265)incl.
  • Burnt Bronze (H-148)incl.
  • Midnight Bronze (H-294)incl.
  • Chocolate Brown (H-258)incl.
  • Patriot Brown (H-226)incl.
  • Coyote Tan (H-235)incl.
  • Desert Sand (H-199)incl.
  • OD Green (H-236)incl.
  • Noveske Bazooka Green (H-189)incl.
  • Forest Green (H-248)incl.
  • Highland Green (H-200)incl.
  • Ridgeway Blue (H-220)incl.
  • KEL-TEC Navy Blue (H-127)incl.
  • USMC Red (H-167)incl.
  • Crimson (H-221)incl.
  • Stormtrooper White (H-297)incl.
  • Satin Aluminum (H-151)incl.
  • Cobalt Kinetics Slate (H-295)incl.
  • Other (specify below)incl.

Camo Pattern

  • MultiCamincl.
  • MultiCam Blackincl.
  • MultiCam Aridincl.
  • Woodland (M81)incl.
  • Digital / MARPATincl.
  • Tiger Stripeincl.
  • Kryptek Typhonincl.
  • Splinter / Geometricincl.
  • Snow / Arcticincl.
  • Custom Pattern (specify below)incl.
LP-SVC-CERA-SUPPBook this service →
Cerakote — Optics & AccessoriesCerakote for optics, knives, lights, and accessories7–10 days$15–$175

Cerakote H-series ceramic coating for optics, knives, lights, bipods, and other accessories. Items are carefully cleaned and degreased before coating. Note that optics cannot be media blasted — adhesion may be reduced and customer assumes risk. A great way to match your accessories to your firearm's finish. Feel free to contact us if you need a custom quote.

Item Type · choose one

  • Scope — Small (LPVO, red dot, compact)$125
  • Scope — Large (long-range, 50mm+ obj)$175
  • Scope Rings / Uni-Mount$55
  • Weapon Light / Flashlight$50
  • Bipod (disassembled)$85
  • Knife — Fixed Blade$55
  • Knife — Folder$55
  • Magazine Basepad / Extension (each)$15

Color · choose one

  • Armor Black (H-190)incl.
  • Graphite Black (H-146)incl.
  • Tungsten (H-237)incl.
  • Titanium (H-170)incl.
  • Sniper Grey (H-234)incl.
  • Gun Metal Grey (H-219)incl.
  • Concrete (H-341)incl.
  • Flat Dark Earth (H-265)incl.
  • Burnt Bronze (H-148)incl.
  • Midnight Bronze (H-294)incl.
  • Chocolate Brown (H-258)incl.
  • Patriot Brown (H-226)incl.
  • Coyote Tan (H-235)incl.
  • Desert Sand (H-199)incl.
  • OD Green (H-236)incl.
  • Noveske Bazooka Green (H-189)incl.
  • Forest Green (H-248)incl.
  • Highland Green (H-200)incl.
  • Ridgeway Blue (H-220)incl.
  • KEL-TEC Navy Blue (H-127)incl.
  • USMC Red (H-167)incl.
  • Crimson (H-221)incl.
  • Stormtrooper White (H-297)incl.
  • Satin Aluminum (H-151)incl.
  • Cobalt Kinetics Slate (H-295)incl.
  • Other (specify below)incl.
LP-SVC-CERA-ACCBook this service →
Cerakote — Design Extras & Add-OnsCerakote add-ons: stencils, battleworn, clear coat, and moreVariesfrom $35

Upgrade your Cerakote job with custom design extras. Options include stencil work, battleworn and distressed finishes, splatter effects, GunCandy special FX clear coats, and more. These are add-on surcharges applied on top of base Cerakote pricing — order alongside your primary Cerakote service. Rush service available at 50% surcharge. Feel free to contact us if you need a custom quote.

Add-On · choose one

  • Stencil — Standard (flag, Spartan, punisher, etc.)incl.
  • Stencil — Complex / Multi-Layer+$50
  • Each Additional Color (beyond listed)+$20
  • Battleworn / Distressed Finish+$15
  • Splatter / Stipple Effect+$10
  • GunCandy / Special FX Clear+$30
  • Clear Coat — Hi-Gloss or Matte+$10
  • Barrel Polish (mirror finish before coating)+$30
  • Surface Prep / Deep Cleaning Fee+$5
  • Non-Stock Color Surchargeincl.
LP-SVC-CERA-EXTRASBook this service →

NFA Services

01
NFA Trust EngravingATF-compliant NFA trust/individual engraving3–5 daysfrom $60

ATF-compliant NFA trust or individual engraving, performed to proper depth and character size per federal requirements. Standard engraving includes your trust name, city, and state on the receiver flat. Magwell, dust cover, and other locations available. We handle aluminum, steel, polymer, and titanium receivers. Feel free to contact us if you need a custom quote.

Engraving Location · choose one

  • Receiver flat (standard)incl.
  • Magwell engraving+$25
  • Dust cover+$15
  • Other (specify in notes)incl.

Material · choose one

  • Aluminum / Steel (standard)incl.
  • Polymer (laser engraving)+$20
  • Titanium+$35
LP-SVC-NFA-ENGRAVEBook this service →

Cleaning Services

05
Pistol CleaningComplete pistol detail cleaning & lube1–2 days$65

Complete detail cleaning service for semi-automatic pistols and revolvers. We carefully field strip your firearm, perform a thorough solvent cleaning of all components, brush the bore, apply proper lubrication, and run a function check before it leaves our bench. Your firearm returns clean, properly lubed, and ready to perform. Feel free to contact us if you need a custom quote.

LP-SVC-CLEAN-PISTOLBook this service →
Rifle CleaningComplete rifle detail cleaning & lube1–2 days$100

Complete detail cleaning service for bolt-action and semi-automatic rifles. We thoroughly clean the bore, action, and all accessible components, then apply proper lubrication and perform a function check. Your rifle returns to you clean, well-lubed, and ready for the range or the field. Feel free to contact us if you need a custom quote.

LP-SVC-CLEAN-RIFLEBook this service →
AR / AK Platform CleaningAR/AK platform deep clean with BCG detail1–2 days$100

In-depth detail cleaning for AR-15, AR-10, and AK-pattern rifles and pistols. We fully disassemble and clean the bolt carrier group, trigger group, and bore, then properly lubricate every component and run a function check. These platforms run hard — we make sure yours is ready for the next round. Feel free to contact us if you need a custom quote.

LP-SVC-CLEAN-ARAKBook this service →
Shotgun CleaningComplete shotgun detail cleaning & lube1–2 days$80–$140

Complete detail cleaning service for shotguns. We clean the bore, action, and all accessible components, inspect choke tubes, apply proper lubrication, and run a function check. Price depends on how the gun comes apart: pumps and semi-autos are straightforward, while break-action guns — over/unders and side-by-sides — take more time to strip and reassemble and are handled with the extra care their value usually warrants. Your shotgun returns clean, properly lubed, and ready for the field or the range. Feel free to contact us if you need a custom quote.

Action Type · choose one

  • Pump-action / semi-automatic$80
  • Break-action — over/under or side-by-side$140
LP-SVC-CLEAN-SHOTGUNBook this service →
Suppressor / Silencer CleaningSuppressor / silencer ultrasonic cleaning2–3 days$75

Professional ultrasonic cleaning for suppressors and silencers. User-serviceable models are fully disassembled with each baffle cleaned individually. Sealed and welded cans are cleaned externally and flushed where possible. Proper suppressor maintenance extends the life of your can and helps maintain sound reduction performance. Feel free to contact us if you need a custom quote.

Suppressor Type · choose one

  • User-serviceable (removable baffles)incl.
  • Sealed / welded canincl.
LP-SVC-CLEAN-SUPPRESSORBook this service →

Parts & Assembly

04
AR Upper Parts Kit InstallAR upper receiver professional assembly3–5 daysfrom $75

Professional assembly of your AR-15 or AR-10 upper receiver from customer-supplied parts. We install the barrel to proper torque specs, align the gas system, mount the handguard, and verify headspace with go/no-go gauges. Every upper leaves our bench ready to run. Feel free to contact us if you need a custom quote.

Platform · choose one

  • AR-15 / 5.56incl.
  • AR-10 / .308+$25
  • Other (specify)incl.

Headspace Check · add any

  • Go/No-Go headspace verification (included)incl.
LP-SVC-PARTS-ARUPPERBook this service →
AR Lower Parts Kit InstallAR lower receiver professional assembly2–3 daysfrom $55

Professional assembly of your AR-15 or AR-10 lower receiver with customer-supplied parts kit. We install the trigger group, buffer system, and all controls, then perform a thorough function check. Whether you're running a mil-spec trigger or a drop-in cassette, we ensure proper fit and reliable operation. Feel free to contact us if you need a custom quote.

Platform · choose one

  • AR-15incl.
  • AR-10 / LR-308+$15

Trigger Type · choose one

  • Mil-spec / standard triggerincl.
  • Drop-in cassette triggerincl.
  • Two-stage match trigger+$15
LP-SVC-PARTS-ARLOWERBook this service →
AR / AK Complete BuildComplete AR or AK build from customer parts5–7 daysfrom $150

Full assembly of an AR or AK platform from customer-supplied parts. AR builds include complete upper and lower assembly with headspace verification. AK builds include receiver population, barrel and trunnion work, and rivet pressing. Every build receives a thorough function check before leaving our bench. Feel free to contact us if you need a custom quote.

Platform · choose one

  • AR-15incl.
  • AR-10+$35
  • AK-pattern (requires rivet & press work)+$75
LP-SVC-PARTS-COMPLETEBook this service →
1911 Tuning & Fitting1911 fitting, tuning & trigger work7–14 daysfrom $150

Expert 1911 fitting and tuning, from basic reliability work to full match prep. Services include action work, trigger pull adjustment, and slide-to-frame fitting. Ideal for competition prep or installing aftermarket parts like match triggers and fitted barrels. Test firing available to verify function and reliability. Feel free to contact us if you need a custom quote.

Service Level · choose one

  • Basic tune (trigger pull, reliability check)incl.
  • Full action job (sear, hammer, disconnector)+$100
  • Match prep (full action + slide-to-frame fit)+$200

Test Firing · add any

  • Test fire & function verification (50 rds, ammo not included)+$50

Premium Parts Fitting · add any

  • Atlas / aftermarket match trigger fitting+$75
  • Fitted match barrel & bushing+$100
LP-SVC-PARTS-1911Book this service →

Sight Work

03
Front Sight Install / SwapFront sight removal & installation1–3 daysfrom $35

Professional front sight removal and installation for handguns and rifles. Dovetail sights are installed using a precision sight pusher to prevent marring your slide. Pinned front sights for AR and AK platforms and suppressor-height sights also available. We ensure a secure, properly seated fit every time. Feel free to contact us if you need a custom quote.

Sight Type · choose one

  • Dovetail front sightincl.
  • Pinned front sight (AR/AK)+$10
  • Suppressor-height sightincl.
LP-SVC-SIGHT-FRONTBook this service →
Rear Sight Install / SwapRear sight removal & installation1–3 days$35

Professional rear sight removal and installation for handguns. All dovetail sights are installed using a precision sight pusher to prevent marring your slide or frame. We accommodate adjustable target sights and suppressor-height sights as well. Every install is checked for a secure, properly seated fit. Feel free to contact us if you need a custom quote.

Sight Type · choose one

  • Dovetail rear sightincl.
  • Adjustable target rear sightincl.
  • Suppressor-height sightincl.
LP-SVC-SIGHT-REARBook this service →
Sight Set Install (Front & Rear)Front & rear sight set removal & installation1–3 days$55

Professional removal and installation of a complete front and rear sight set at a bundled price. All dovetail work is done with a precision sight pusher to prevent marring. Whether you're upgrading to night sights, suppressor-height sights, or a standard set, we ensure a secure, properly fitted install. Feel free to contact us if you need a custom quote.

Sight Configuration · choose one

  • Standard height setincl.
  • Suppressor-height setincl.
  • Night sight set (tritium)incl.
LP-SVC-SIGHT-SETBook this service →

Prices are starting estimates for the listed configurations and can change with parts, condition, and scope; anything that can't be quoted from the list is quoted from the firearm. We don't install forced-reset, binary, or similar triggers, and we don't work on black-powder firearms or airguns. Ask for a custom quote →

Ready to book a service?

Tell us the platform and the work, or send photos for an estimate. We answer fast and quote before anything is cut, coated, or torn down.

Start a request