Restoration
Full & Deep Restoration
Any firearm, all the way back: stripped to the last pin, the steel de-rusted and refinished in the finish it wore, the wood repaired and refinished, worn springs and pins replaced, then reassembled, function-checked, test-fired, and photographed. A Browning A5, a grandfather's pump gun, a Thompson for the case — handguns, rifles, and shotguns of any make, not just the heritage platforms with their own pages.
A deep restore, and the lighter one
A full restoration is a complete teardown. Every part comes off and gets judged on its own: metal is de-rusted, dressed, blasted, and refinished — bluing, parkerizing, or a coating, whichever the gun should wear; the stock is stripped, steamed, repaired, and refinished; springs, pins, extractors, and anything worn past service are replaced; and the whole thing is reassembled, hand-fitted where it needs to be, function-checked, and test-fired. That's the version a Browning A5 with sixty years of duck blinds on it gets, and it's the version that makes a rifle safe to shoot again rather than just nicer to look at.
Not every gun needs that, so we also do the lighter one: a restoration-grade cleaning with rust removal, a finish touch-up, and a function check, for a gun that's tired rather than wrecked. When a customer brings in five long guns from a closet, that's usually the tier they need. We'll tell you which one your gun is at the counter, and quote it as that.
Preserve what's worth preserving
The instruction on a lot of these tickets is some version of "to good, not perfect." That's the right instinct. A restoration that erases the roll marks under fresh bluing, sands off a stock's cartouche, or polishes a hundred-year-old shotgun to a mirror has destroyed the thing it was supposed to save. We work conservatively: markings are protected, the original finish type is matched, and honest wear that isn't hurting the gun gets left alone. If your gun is one that's worth more untouched, we'll say so before we start.
How a full restoration runs here
Photos, then a plan
Bring it in or send photos of both sides, the action, and any damage. You get a written plan — what we'd refinish, repair, replace, and leave alone — with a quote.
Teardown and triage
Complete disassembly. Every part is inspected and sorted: reuse, repair, or replace. Anything we find beyond the quote stops for a call.
Metal
Rust removed, pitting dressed, surfaces prepped and refinished in the correct process — blued, parkerized, or coated on our own benches.
Wood
Stock and forend stripped, dents steamed, cracks repaired, checkering cleaned up, and refinished in the oil, shellac, or varnish the gun wore.
Assembly, test, record
Reassembled and hand-fitted, function-checked, test-fired, and photographed before and after for your records and ours.
Answers
Common questions
What does a full restoration cost?
It's quoted from the gun, not a menu. To set expectations: recent deep restores on a Browning A5 and an M1 Carbine ran $320 to $345 each in labor, and a light restore — rust removal, cleaning, touch-up, function check — has run $100 to $120 a gun when several come in together. Parts are on top. Send photos and you'll get a real number.
Will it still be original afterward?
A refinished gun is refinished; we won't pretend otherwise. What we protect is everything that makes it yours and makes it that gun — the markings, the stock stamps, the correct finish type and color, the original parts wherever they're serviceable. If originality is the whole value of your gun, we'll tell you to leave it alone, and we'll mean it.
Can you make an old gun safe to shoot again?
Usually. A full restoration includes replacing worn springs and pins, checking headspace where it applies, and a live-fire function test, so the gun leaves ready to use, not just to look at. If we find something that can't be made safe — a cracked receiver, a barrel with a bulge — you'll hear it before we spend your money.
Elsewhere on the bench
More from the shop
Gunsmithing
Handguns, rifles, shotguns and everything between — repairs, threading, triggers, optics and fitting on our own bench, quoted before we touch your firearm.
Explore →07 servicesNFA Center
Silencer sales plus Form 1 and Form 4 filing, ATF fingerprints, passport photos and gun trust notary — handled at one counter in Roswell.
Explore →03 servicesFinishing & Metalwork
Durable firearm finishes done in-house: Cerakote and stencil work, fiber-laser engraving and Form 1 marking, and parkerizing.
Explore →05 servicesLogistics & Commerce
Inbound FFL transfers, outbound firearm shipping, bulk ammunition, and FFL08 importation with Form 6 filing and CBP clearance.
Explore →Bring us the project.
Start an NFA transfer, ask about a service, or send photos for an estimate. We answer fast.