Restoration
Wood Refinishing & Stock Repair
Gun stocks and forends brought back the way they were made: stripped without harsh chemicals, dents steamed up, cracks and chips repaired, checkering cleaned or recut, and refinished in the oil, shellac, or varnish the gun wore — with the cartouches, proof stamps, and honest character left where they belong.
Refinishing that respects the wood
Wood tells you what it's been through, and a good refinish keeps the story while losing the damage. The old finish comes off gently — no dip tank that raises the grain and lifts the glue — dents are steamed back up where the fibers are only compressed, and the surface is sanded lightly and evenly so the edges stay sharp and the stamps stay legible. Then the finish that's right for the gun: hand-rubbed oil for a sporting rifle or a GI stock, shellac for a Mosin or a Mauser, a durable varnish where a shotgun wants it. Not polyurethane over everything.
Checkering is cleaned out with the pattern's own line spacing and recut where it's worn smooth; a grip area that's been abused gets cleaned up and refinished dark to match; a sling swivel goes in where you mark it, drilled square to the wood. Walnut, birch, laminate, and the odd exotic all come across the bench.
Repairs, not replacements
Cracked wrists, chipped toes, a split forend, a stock somebody drilled for a sling and regretted: most of it repairs. Cracks are cleaned, glued with the right adhesive under clamps, and pinned or reinforced where the stress calls for it; missing chips are patched with matched wood and blended into the finish; old repairs done badly get redone properly. A stock inlet that needs relieving for a new bolt handle or a barrel band is fitted here rather than forced. When a stock is genuinely past saving we'll say so and help you find a correct replacement — but that's rarer than people expect.
How a stock refinish runs here
Look, then plan
We assess the finish type, the damage, and what's worth keeping — stamps, cartouches, patina — and agree on the finish the gun should wear.
Strip and repair
The old finish comes off gently, dents are steamed, cracks glued and pinned, chips patched, checkering cleaned or recut.
Finish and fit
Hand-applied oil, shellac, or varnish built up in coats, then the stock is refitted to the metal so nothing binds and the lines match.
Answers
Common questions
Will refinishing remove the cartouches on my military stock?
Not here. Stamps and cartouches are provenance, and the whole approach — no dip stripping, light hand sanding, steaming instead of cutting — exists to keep them. If a stock is so far gone that saving the stamps and saving the stock are in conflict, we'll talk about it before touching it.
Can you match the original finish?
That's the point. A Mosin gets shellac, a Garand gets the oil it wore, a Browning shotgun gets the gloss it shipped with. We identify what the gun originally carried and put that back; if you'd rather have something different — a satin oil instead of gloss — that's your call and we'll say what it does to the look and the value.
What does stock work cost?
It's quoted from the wood. For reference, checkering cleanup with a refinish of the grip area and a swivel installed ran $100 to $120; relieving a stock inlet for a bolt handle ran $175 to $195 as part of a larger job; grips polished and refitted ran $40 to $60. A full strip and refinish of a long-gun stock is quoted after we've seen it.
Elsewhere on the bench
More from the shop
Gunsmithing
Handguns, rifles, shotguns and everything between — repairs, threading, triggers, optics and fitting on our own bench, quoted before we touch your firearm.
Explore →07 servicesNFA Center
Silencer sales plus Form 1 and Form 4 filing, ATF fingerprints, passport photos and gun trust notary — handled at one counter in Roswell.
Explore →03 servicesFinishing & Metalwork
Durable firearm finishes done in-house: Cerakote and stencil work, fiber-laser engraving and Form 1 marking, and parkerizing.
Explore →05 servicesLogistics & Commerce
Inbound FFL transfers, outbound firearm shipping, bulk ammunition, and FFL08 importation with Form 6 filing and CBP clearance.
Explore →Bring us the project.
Start an NFA transfer, ask about a service, or send photos for an estimate. We answer fast.