Restoration
Heirloom & Display Preservation
The family gun that isn't going to be shot again, or is going to be shot once a year: cleaned, stabilized, tightened up, and made presentable or safe — without stripping away the age that makes it what it is. Conservative work, done to preserve, for guns headed to a display case, a safe, or the next generation.
Preserve, don't erase
Not every old gun should be restored. A grandfather's shotgun with honest wear, a 1927 Thompson going into a display case, a Ruger somebody wants to look right on the wall — these want a different job: the rust stopped, the bore and action cleaned, the finish stabilized and lightly brought up, the stock cleaned and fed, loose screws and worn pins tightened or replaced, and the gun reassembled so it's sound. What's left alone is the patina, the marks, the evidence of a life. The instruction on these tickets is usually "make it look good" or "to good, not perfect," and that's exactly the standard.
If you do want it shootable, say so. A preservation job can include a function check and a test-fire, or a headspace check on an old military rifle, so a gun that's been in a closet for forty years goes to the range once a year without a surprise. If it shouldn't be fired — a Damascus barrel, a cracked receiver — we'll tell you, and set it up for the wall instead.
Value, and the honest advice about it
Preservation is also where we'll tell you not to spend money. An all-original gun with worn finish is usually worth more than the same gun refinished, and a family piece is worth more to the family as it is than polished into something it never was. When we think a gun should be left alone beyond a clean and a stabilize, we say so. When it's been refinished badly already, or sporterized, or is simply an ordinary gun that you'd like to look good, restoration is the right call and the full restoration page is where that starts.
How a preservation job runs here
Talk it through
Display, safe, or occasional use? Original or presentable? We agree on what the gun is for and what must not change before anything is touched.
Clean and stabilize
Rust stopped, bore and action cleaned, metal and wood fed and protected, loose or worn hardware tightened or replaced.
Check and hand back
Function-checked, test-fired or headspace-checked if it's going to be shot, then photographed and returned with notes on what was done and what was left alone.
Answers
Common questions
Is it worth restoring my grandfather's gun?
Ask what you want from it. If the answer is "keep it, safely, and hand it down," then preservation — clean, stabilize, protect — is usually all it wants, and costs the least. If the answer is "shoot it" or "make it look the way it did new," that's a restoration, and we'll quote it honestly. Either way we'll tell you what we'd do and what we'd leave alone.
Can you make it safe to display in a case?
Yes. The gun is cleaned inside and out, the metal is protected against the humidity a case traps, the wood is fed, and everything is tightened so it holds together on a stand. A recent Thompson came in for exactly that — cleaned and tightened for a display case — and ran $220 to $240.
What has this cost recently?
Reassembling a Ruger, cleaning it, and removing surface rust so it looked right ran $45 to $65. A preservation clean with rust stabilization on a collectible revolver ran $100 to $120. The Thompson above ran $220 to $240. It's quoted from the gun, and the lighter the touch, the smaller the number.
Elsewhere on the bench
More from the shop
Gunsmithing
Handguns, rifles, shotguns and everything between — repairs, threading, triggers, optics and fitting on our own bench, quoted before we touch your firearm.
Explore →07 servicesNFA Center
Silencer sales plus Form 1 and Form 4 filing, ATF fingerprints, passport photos and gun trust notary — handled at one counter in Roswell.
Explore →03 servicesFinishing & Metalwork
Durable firearm finishes done in-house: Cerakote and stencil work, fiber-laser engraving and Form 1 marking, and parkerizing.
Explore →05 servicesLogistics & Commerce
Inbound FFL transfers, outbound firearm shipping, bulk ammunition, and FFL08 importation with Form 6 filing and CBP clearance.
Explore →Bring us the project.
Start an NFA transfer, ask about a service, or send photos for an estimate. We answer fast.